Mikrotik hAP access point

This small home access point is the perfect device for homes or small offices where you only need a wireless access point and a few connected wired devices.
The new hAP, based on our popular RB951-2n, is an improvement in many areas.
The device can be powered from a wall outlet or with passive PoE from a PoE injector. A power adapter is included.
The hAP provides a PoE output function for port #5 - it can power other PoE-enabled devices with the same voltage as it is connected to the unit. The maximum load of the port is 500 mA.
The hAP is preconfigured, so all you need to do is connect the Internet cable, power supply, and start using the Internet by connecting to the MikroTik network.

Specifications
Product code RB951Ui-2nD
Architecture MIPSBE
CPU QCA9531
Number of processor cores 1
Processor clock speed 650 MHz
Switch chip model QCA9531
Dimensions 113 x 89 x 28 mm
License RouterOS 4
Operating system RouterOS
RAM size 64 MB
Memory size 16 MB
Storage type FLASH
MTBF Approximately 100,000 hours at 25°C
Tested ambient temperature -30°C to 70°C

Wireless capabilities
Wireless 2.4 GHz Maximum data transfer rate 300 Mbit/s
Wireless 2.4 GHz number of chains 2
Wireless 2.4 GHz standards 802.11b/g/n
Antenna gain dBi for 2.4 GHz 1.5
Wireless 2.4 GHz chip model QCA9531
Wireless 2.4 GHz generation Wi-Fi 4

Ethernet
10/100 Ethernet ports 5

Peripheral devices
Number of USB ports 1
USB power reset Yes
USB slot type USB type A
Maximum USB current (A) 1

Power
Number of DC inputs 2 (PoE-IN, DC jack)
DC jack input voltage 10-28 V
Maximum power consumption 5 W
Cooling type Passive
PoE in passive PoE
PoE input voltage 10-28 V

PoE output
PoE output port Ether5
PoE output Passive PoE
Maximum output per port (input 18-30 V) 500 mA
Maximum total output (A) 500 mA

Certifications and approvals
Certification CE, FCC, IC, EAC, ROHS
IP IP20