FANTEC NVMe PCIe-WL-TR-1 Slide-In Frame

(ocijenilo: 0 korisnik/a)

Šifra: 14-792731 | Brand: FANTEC

31,20 €
  • Dostupno za narudžbu, isporuka unutar 3 do 14 radnih dana
  • Mogućnost plaćanja na rate
    Već od 0,94 €/mj. ℹ️
  • Cijena dostave za ovaj artikl je 6,00 €

FANTEC NVMe PCIe-WL-TR-1 Slot

With the FANTEC PCIe card you can use an NVMe PCIe SSD internally, exchangeable in your PC. The NVMe SSD is mounted on a slot without tools and plugged into the removable frame of the card at the back of your PC via the slot bracket. This allows you to use and change the NVMe quickly, conveniently and without tools in your PC - without opening the PC.
The FANTEC NVMePCIe TR-1 slot expands your adapter card by another slot bracket.
Optimal protection: Your NVMe is safely housed.
The sensitive contacts of the NVMe are protected. The slide-in carrier uses its own connector strip.
Optimal cooling: Your NVMe is thermally coupled to the aluminium heat-conducting plate inside the slide-in rack with a heat-conducting pad. The heat is conducted via the stainless steel slide-in frame to the solid slot bracket. Due to the open and air-permeable design, the operating heat of your NVMe is optimally dissipated.

Features:

  • NVMe SSD removable frame for fast, tool-free disk replacement.
  • M.2 NVMe M-key SSD in form factor 2230 to 2280
  • For PCIe 3.0/4.0 x4 NVMe M.2 M-key SSDs
  • Transfer rates up to 64 Gbit/sec. Depending on the NVMe used and the mainboard
  • Adapter and carrier unit made of stainless steel
  • Heat-conducting plate and front panel of the carrier made of aluminium
  • Two-colour LED signals operating status
  • Stainless steel anti-vibration springs reduce operating noise of the PC
  • Dimensions (W x D x H): 123.8 x 33.6 x 11.4 mm
  • Weight: 68 g

 

tip
tip /vrsta: klizni okvir

osobine
sučelje: PCIe 3.0 x4
Maks. brzina prijenosa podataka (Mbps): 64000

Budite prvi koji će ostaviti komentar! Vaše mišljenje može pomoći drugima pri odluci o kupnji.

Komentiraj proizvod