GTV luksomat, light sensor, 4800W, adjustable

The light sensor is used to automatically turn on the lights at dusk and turn them off at dawn. This helps you save electricity.

It consists of a sensor protected by a waterproof housing and an adjustable switch with a sensitivity range of 5 to 50 LUX.

The sensor and switch are connected by a 90 cm cable.

The switch is suitable for mounting on a DIN rail in an electrical cabinet.

Installation:

• First, make sure that there is no electrical voltage in the network.
• Determine the correct position of the sensor: it must be installed above the light fixture to avoid malfunction.
• Drill a 13 mm diameter hole in the surface for the sensor.
• Gently insert the sensor head into the mounting hole.
• Connect the light (load) and power supply (electrical network) to the switch – the wiring diagram is provided in the enclosed instructions.
• After installation, turn the power back on and check the sensor's operation.

Technical specifications:

Voltage: 220-240V AC / 50-60Hz

Maximum permissible load:

4800W / 20A Switch dimensions: 66 x 36 x 90mm Weight: 130g Sensor hole installation diameter: 13 mm Sensor protection standard: IP54 Switch protection standard: IP20 Cable length from sensor: 90 cm