Mikrotik Gigabit Router RB4011iGS+5HacQ2HnD-IN

Powerful 10xGigabit port router with a quad-core 1.4 GHz processor, 1 GB RAM, SFP+ 10 Gbps cage, dual-band 2.4 GHz / 5 GHz 4x4 MIMO 802.11a/b/g/n/ac wireless and desktop housing.

RB4011 Series - incredibly powerful routers with ten Gigabit ports, SFP+ 10 Gbps interface, and hardware-accelerated IPsec at an excellent price!
The RB4011 uses a quad-core Cortex A15 processor, the same as in our carrier-grade RB1100AHx4 unit. The unit is equipped with 1 GB of RAM, can provide PoE output on port #10, and features a compact and professional-looking solid metal housing in matte black.
The RB4011iGS+5HacQ2HnD-IN (WiFi model) is a dual-band, quad-chain unit with a supported data transfer rate of up to 1733 Mbps at 5 GHz. For older devices, the unit also has a dual-chain 2 GHz wireless card installed in the miniPCI-e slot.
The RB4011iGS+5HacQ2HnD-IN (international) supports the 2412-2484MHz and 5150MHz-5875MHz ranges (the specific frequency range may be limited by national regulations).
Note: Passive DACs (MikroTik S+DA0001/S+DA0003) are not supported.

Specifications:
ARM 32-bit architecture
CPU AL21400
Number of processor cores 4
Auto-adjustable processor frequency (533 - 1900) MHz
Switching chip model RTL8367SB
Dimensions 228 x 120 x 30 mm
License RouterOS 5
Operating system RouterOS v7
RAM size 1 GB
Memory size 512 MB
Memory type NAND
MTBF Approximately 200,000 hours at 25°C
Tested ambient temperature -40°C to 45°C
IPsec hardware acceleration Yes

Wireless capabilities
Wireless 5 GHz Maximum data transfer rate 1733 Mbit/s
Wireless 5 GHz number of chains 4
Wireless 5 GHz standards 802.11a/n/ac
Antenna gain dBi for 5 GHz 3
Wireless 5 GHz chip model QCA9984
Wireless 5 GHz generation Wi-Fi 5
Wireless 2.4 GHz Maximum data transfer rate 300 Mbit/s
Wireless 2.4 GHz number of chains 2
Wireless 2.4 GHz standards 802.11b/g/n
Antenna gain dBi for 2.4 GHz 3
Wireless 2.4 GHz chip model R11e-2HnD
Wireless 2.4 GHz generation Wi-Fi 4
WiFi speed AC2000

Ethernet
10/100/1000 Ethernet ports 10

Fiber
SFP+ ports 1

Peripheral devices
MiniPCI-e slots 1
Serial console port RJ45

Power
Number of DC inputs 2 (DC jack, PoE-IN)
DC socket input voltage 12-57 V
Maximum power consumption 44 W
Maximum power consumption without connections 23 W
Cooling type Passive
PoE in passive PoE
PoE in input voltage 18-57 V

PoE output
PoE output port Ether10
PoE output Passive PoE up to 57V
Maximum output per port (input 18-30 V) 600 mA
Maximum output per port (input 30-57 V) 420 mA
Maximum total output (A) 600 mA

Certification and approvals
Certification CE, FCC, IC, EAC, ROHS
IP IP20

Other
PCB temperature monitor Yes
Voltage monitor Yes