Mill convector LED radiator steel 2200w - an upgrade of Mill's CO2200MECMAX convector radiator, it has beautiful aluminum legs, a timer, and an electronic display for setting the exact desired temperature.
Purchasing tips:
Room size
You will need to measure the size of the room, i.e., the floor area in square meters and the ceiling height, before deciding which model you need. If the room is too large, you may need multiple heaters to distribute the heat evenly between each source. In mild climates, use approximately 60-70 watts per square meter for your calculation, and 70-85 watts per square meter for colder climates.
Well-insulated house?
The age and insulation of your home will also affect your heating needs. Fewer watts per square meter are needed for newer homes and apartments with heat supply, while older and less well-insulated homes will need proportionally more watts per square meter.
Avoid thermal bridges
Although modern windows are airtight, they are not usually as well insulated as walls. The air inside them will quickly cool down and sink towards the floor. This is called a thermal bridge, and it can be avoided by installing a suitable heating element under each window.
Go for more watts than you need
Once you have determined how many watts you need, avoid buying a heater that just meets your needs. Buy a product that gives you a little extra capacity so you don't have to run it at full power. This will also keep the surface temperature of the heater lower.
Official manufacturer's website: https://millnorway.com/product/mill-instant-max-mec-convection-heater-2200w/
Don't miss:
Zaštićeno online plaćanje
Dostavljaču kod preuzimanja paketa
Do 36 mjesečnih rata
