MILL PTC 1800W black heater CUS1800MECBA

MILL CUS1800MECWA

We know that sometimes we like to warm up quickly. Or we want to turn on additional heating even on the coldest days. Either way, Mill heaters are the ideal solution for you. They heat up quickly over a large area. This means that they will quickly help you increase the temperature in your living room.

They use a powerful motor that disperses heat as much as possible. In addition, Mill heaters are equipped with a PTC heating element. The advantage is that, compared to other types of heating elements, the PTC element has a much lower surface temperature, which means that it raises much less dust. It's a win-win situation.

That's why Mill heaters are just right for those really cold days.

The Mill CUS1800MEC heater is the latest addition to our Mill family. This super-sleek Mill heater has the same beautifully rounded edges as the "Mill Steel" and an elegant aluminum base, which makes it look as if the heater is floating above the floor. Simply amazing!

Recommended room size: 10-40 m2

Features

• PTC heating element - Low surface temperature
• Exceptional design
• Elegant aluminum base
• Powerful fan
• Easy to operate
• Easy to move around the room and simple to store - small size
• Toggle switch

Technical specifications:

• Power: 1800W (1200 / 1800W)
• Thermostat: mechanical
• Heating element material: PTC
• Remote control: no
• Color: Mill white
• Cable: black 140 cm
• Cable outlet: rear

Purchasing guidelines:

Room size
You will need to measure the size of the room, i.e., the floor area in square meters and the ceiling height, before deciding which model you need. If the room is too large, you may need multiple heaters to distribute the heat evenly between each source. In mild climates, use approximately 60-70 watts per square meter for calculation purposes and 70-85 watts per square meter for colder climates.

Well-insulated house?
The age and insulation of your home will also affect your heating needs. Fewer watts per square meter are needed for newer homes and apartments with heat supply, while older and less well-insulated homes will need proportionally more watts per square meter.

Avoid thermal bridges
Although modern windows are airtight, they are not usually as well insulated as walls. The air inside them will quickly cool down and sink towards the floor. This is called a thermal bridge, and it can be avoided by installing a suitable heating element under each window.

Go for more watts than you need
Once you have determined how many watts you need, avoid buying a heater that just meets your needs. Buy a product that gives you a little extra capacity so you don't have to run it at full power. This will also keep the surface temperature of the heater lower.