Šifra: 31-E0019085 | Brand: ROBOROCK
The Roborock Qrevo Edge 2 Pro is an ultra-thin, wet-cleaning robotic vacuum cleaner designed for homes where hard floors, carpets, doorsteps, pets and lots of furniture are all in common. It boasts 25,000 Pa of HyperForce suction power, dual rotating cloths with up to 12 N of pressure, an advanced LiDAR+ camera for obstacle recognition, and a 3.0 Hygiene+ multi-purpose station that takes care of washing, drying, mopping and dusting all by itself.
Industry-first AdaptiLift chassis - dynamic carpet cleaning Dynamic undercarriage lift up to 3 cmThe special feature of the Qrevo Edge 2 Pro is the AdaptiLift undercarriage, which actually raises and lowers when cleaning carpets. The robot has omni-directional wheels and a system that continuously measures the height of the surface. When it detects a carpet (up to about 3 cm high), it raises the chassis and optimises the angle and contact of the suction nozzle to keep it as close to the fibre as possible. The result is deep cleaning of carpets of different thicknesses, without loss of suction power at the transitions between floor coverings.
4 cm double thresholds - no snaggingAdaptiLift not only serves carpets, but also passageways. The robot can negotiate thresholds of up to 4 cm (so-called "double thresholds"), which means it moves unaided between rooms, over slats and higher floor edges.
HyperForce 25,000 Pa - suction for stubborn dirt Maximum suction power of 25,000 PaThe HyperForce™ system reaches a maximum suction power of 25,000 Pa, which is currently among the very top of the range of robotic vacuum cleaners. This value allows the robot to suck up fine dust, sand, crumbs and deeply embedded dirt even from dense, high footprints.
A smart strategy for carpetsIn the app, you can define how the robot should behave on carpets:
Deep carpet cleaning mode - when it enters the carpet, it automatically lifts the mop, increases suction power and does not dampen the carpet.
Carpet avoidance mode - the robot recognises carpets and systematically avoids them, cleaning as close to the edges as possible.
This allows you to customise each room and each carpet - e.g. deep carpet vacuuming in the living room and completely dry flooring in the children's room. The settings are saved in a map for each individual room.
Upgraded wet cleaning - dual rotating wipes 12 N pressure and up to 200 RPMQrevo Edge 2 Pro uses two rotating cloths (mops) that rotate at up to 200 RPM, applying up to 12 N of pressure to the floor. The combination of rotation, pressure and hot water acts like a mechanical scrubbing - the two cloths literally polish the surface.
Automatic cloth removal - carpet protectionWhen moving from hard floors to carpets, the robot automatically withdraws or lifts the cloth in vacuum-only or "carpet priority" mode. This means no moisture is transferred to the carpets - keeping them dry, soft and free of wet edges. The user doesn't have to think about when to switch wet cleaning on or off; the system does it itself according to the settings and floor sensing.
Double anti-tangle system - DuoDivide + FlexiArm Arc DuoDivide main brushThe DuoDivide main brush is designed with two short bristle rollers and special slats that direct the hair towards the suction channel and away from the brush axis. According to Roborock's internal tests, this means 0% hair tangling and a 100% hair removal rate, ideal for homes with long-haired members and pets.
FlexiArm Arc Side BrushThe FlexiArm Arc Side Brush has a curved (arched) shape and works in conjunction with edge detection systems. Its function is to:
Pushing dirt from edges and corners towards the suction channel,
actively preventing hair from curling up at the tips of the bristles,
cleaning precisely along walls, furniture legs and in narrow places.
The exclusive FlexiArm system combines:
FlexiArm Arc side brush
and edge wiping with rotating cloths that extend towards the edge.
The 3.0 Hygiene+ washes mop cloths with water heated to 100 °C. High temperature:
Softens dried dirt, grease and food residues on cloths,
kills up to 99.99% of bacteria,
ensures that the cloths are really hygienically clean after washing
Automatic cleaning of the base station with hot water
The same hot water system is also used to automatically wash the base of the station. This removes residual dirt and prevents the build-up of slime or unpleasant odours in the area where the robot parks and washes the cloths. The user only needs to manually rinse the base from time to time and the automation does most of the work.
Intelligent dirt detectionDuring mop washing, the system continuously measures the level of soiling in the water. If the dirt detected is high, it stops:
extends the mop wash cycle,
if necessary, initiates an additional mopping pass over the dirtiest parts of the floor.
This way, dirty corners or frequently used pathways (e.g. kitchen) are automatically cleaned more thoroughly, without any special setting by the user.
Drying mops and stations with 55 °C warm airAfter washing, the mop station dries the mop cloths and base with approximately 55 °C warm air. This:
prevents the formation of mould,
reduces odours,
keeps the cloths dry between each cleaning, so they never become soaked or damp.
The station can automatically fill the robot's tank with hot water when needed. This way, the robot always has the optimum water temperature for the next wet cleaning runs and the user does not have to manually top up.
Automatic detergent dispenserThe integrated detergent tank and automatic detergent dispenser add the correct amount of detergent when mopping or wet mopping. No more guessing how much detergent is enough - the system takes care of the optimum ratio itself.
Automatic dust emptying - up to 65 days without emptyingAfter each cleaning, the robot empties the internal dust container into a larger bag in the station. Depending on the frequency of cleaning, this can mean up to approximately 65 days of use without manually emptying the bag. When it is full, simply replace it as you would with a normal vacuum cleaner.
Removable station baseThe base on which the robot stands is completely removable, making it easy to hand wash under running water when you want an extra thorough cleaning.
Ultra-thin design 7.98 cm and RetractSense navigation 7.98 cm - reaches where others can'tAt just 7.98 cm tall, Qrevo Edge 2 Pro is one of the thinnest Roborock robots with a full LiDAR system built-in. This makes it easy to slip under low cabinets, sofas and beds and clean dust where other devices simply can't get past.
RetractSense - lift, retract and navigate anywhereThe RetractSense system controls the Retractable LDS module:
In open spaces, the LiDAR is raised and performs 360° laser scanning for precise mapping and navigation.
Under furniture, the sensor automatically retreats downwards and monitors the surroundings with a so-called "100° rear view" to ensure the robot moves safely through tight spots without getting stuck or bumping into overhead edges.
On top, two additional:
A top distance meter that measures the clear height above the robot and automatically adjusts the LDS position,
a top contact sensor that senses contact with obstacles above the robot (e.g. the bottom panel of a cabinet) and prevents scratching.
The robot uses a combination of structured light and an RGB camera for so-called Reactive AI obstacle recognition. It recognises and avoids more than 200 typical objects - cables, shoes, pet bowls, pet "surprises", etc. This works even in the dark, so there's no need to clear the floor before cleaning.
VertiBeam - accurate side detectionThe VertiBeam side laser system measures the distance to obstacles at the side, allowing:
very precise driving along walls and furniture,
better cleaning of edges without the robot rubbing or bumping into edges.
Qrevo Edge 2 Pro has a full set of features designed for dog and cat owners:
Video call - you can see live where the robot is and watch your pet at the same time via the app; you can even "talk" to your pet with two-way audio.
Pet photos - while cleaning, the robot can take cute photos of your pets and save them in an album in the app.
Automatic pet recognition - when it gets close to an animal, the robot stops the main brush and carefully backs away so as not to scare or hurt it.
Pet search - the in-app robot can literally be tasked to 'find' an animal; it scans the apartment and displays where it has detected it.
The robot supports the Matter standard, which means it can easily integrate into a variety of smart home systems without worrying about compatibility. It's also compatible with Alexa, Google Assistant, Siri (via HomeKit) and Hello Rocky's own voice assistant, so you can control it with your voice.
Roborock app and additional optionsThe Roborock app gives you:
Multi-storey floor plans with labelled carpets,
scheduling, no-go zones and wet-only or dry-only cleaning areas,
Automatic scenarios (e.g. room hasn't been cleaned for 30 days → robot performs vacuuming + wet wiping sequence; after cleaning the kitchen, it additionally washes the cloths, etc.),
widgets and Apple Watch support so you can start cleaning with a tap on your phone or watch.
Zaštićeno online plaćanje
Dostavljaču kod preuzimanja paketa
Do 36 mjesečnih rata
